Exclusive in Cyprus · Schwing Stetter & Magni

Construction Equipment.
Global Brands.
Local Expertise.

For forty years we have supplied Cyprus with concrete and lifting machinery from two of the best manufacturers in the world — and kept it running with factory-trained engineers, nationwide on-site service and a full parts inventory.

Request a quotation Call service

Magni RTH 8.39 rotating telescopic handler, boom raised, stabilisers deployed

Magni RTH 8.39 · 38.80 m · 8,000 kg

40Years in the Cyprus market

2Exclusive manufacturer franchises

55.20 mVertical reach, Schwing S 56 SXF

8,000 kgLifting capacity, Magni RTH 8.39

In service across Cyprus

Our machines at work

Schwing Stetter and Magni equipment supplied, delivered and maintained by AMC on sites across the island.

Magni RTH 6.30 working at height — Neocleous Tower

Exclusive representative in Cyprus

Concrete, from batch to placement

Schwing Stetter is a leading global manufacturer of concrete construction equipment — production, transport, placement and recycling. The full line is available in Cyprus through AMC.

S 56 SXF

Truck-mounted concrete pump

Schwing S 56 SXF

The new standard in the 50-metre class

55.20 mVertical reach

162 m³/hConcrete output

<45 tOperating weight

A five-section Roll and Fold boom on a 5-inch pipeline with standard elbows and a full subframe. The patented SXF fold-out outrigger removes the need for a multi-telescopic support in this class — fewer wear points, more stability under the boom. The long-stroke P2525 pump kit needs roughly eight strokes a minute at 60 m³/h, which is where the running-cost argument lives.

Full specification

Manufacturer data, Feb 2024
Vertical reach	55.20 m
Reach depth	39.80 m
Horizontal reach	49.87 m from turret centre
Net horizontal reach	46.23 m from outrigger front
Concrete output, max	162 m³/h
Pressure on concrete, max	85 bar
Boom	56 R, 5 sections, Roll and Fold
Opening angles, stages 4 / 5	185° / 210°
Inflexion point heights	4.35 / 16.00 / 25.70 / 35.00 / 45.00 m
Unfolding height	11.50 m
Slewing range	2 × 365°
Delivery line	DN 125, 275 mm radius elbows
End hose	4.00 m
Pump kit	P2525, cylinders 250 × 2,500 mm
Stroke rate, max	22 / min
Drive	636 l/min
Concrete valve	B-ROCK, 15 wear parts
Hydraulic system	Open, 600 l tank
Outrigger width, front / rear	9.80 m / 11.75 m
Outrigger load, front / rear	350 kN / 310 kN
Water tank	610 l
Operating weight	< 45 t on 8 × 4
Example chassis	Mercedes-Benz Arocs 4840, 8 × 4
Control	VECTOR II, SC 30 remote (8 h)

Enquire about this machine Data sheet (PDF)Full range

AM 10 C

Truck mixer · Basic Line

Stetter AM 10 C

Proven technology in a functional design

10 m³Nominal volume

58.7 %Fill ratio

3,990 kgMixer weight

The economical entry into the Stetter range. A frame in S 500 MC high-strength steel keeps weight down without losing stability, and T-Protect wear protection puts 5 mm mixing spirals in the zones that actually wear. Short filling, emptying and cleaning times are where the economics are won over a working life.

Full specification

Manufacturer data, Basic Line
Nominal volume	10 m³
Geometric drum volume	17,040 l
Water line	11,400 l
Fill ratio	58.7 %
Drum inclination	11.20°
Drum speed	0–12 / 14 rpm
Drum diameter	2,300 mm
Mixer weight	3,990 kg
Feed hopper height	2,532 mm
Clearance height	2,592 mm
Discharge tray transfer height	1,147 mm
Frame	S 500 MC steel
Wear protection	T-Protect, 5 mm spirals
Gearbox	ZF or PMP
Optional control	SMART Control 3.0

Enquire about this machine Data sheet (PDF)Full range

Exclusive representative in Cyprus

Lift, place, rotate

Magni builds rotating and fixed telescopic handlers for construction, industry and other demanding applications. The full line is available in Cyprus through AMC.

RTH 8.39

Rotating telescopic handler

Magni RTH 8.39

360° continuous rotation, two extension modes

38.80 mLifting height

8,000 kgLifting capacity

27.00 mMaximum reach

Two extension modes, M1 and M2, give access to two separate load charts: M1 for maximum reach and the highest capacities at full height, M2 for restricted reach with more capacity in close. Ten published load charts in total, covering forks, winch, hook, jib and four platform configurations — with the over-under platform working to 48.20 m.

Full specification

Magni data sheet REV10.B EN
Maximum lifting capacity	8,000 kg
Maximum lifting height	38.80 m
Maximum reach	27.00 m
Rotation	360° continuous
Stabilisers	Telescopic scissor
Engine, Stage IIIA	Volvo TAD 552 VE, 160 kW (218 hp)
Engine, Stage V	Volvo TAD 583 VE, 175 kW (238 hp)
Maximum torque	910 Nm / 975 Nm
Displacement	5.13 l, 4 in line
Transmission	Hydrostatic, 480 bar, 2-speed dropbox
Drive / steering	4WD · 4WS, frontal / concentric / crab
Front axle levelling	± 8°
Tyres	445/65 R22.5
Maximum travel speed	40 km/h
Gradeability, unladen	62 %
Turning radius at forks	6,760 mm
Total unladen weight	23,990 kg
Hydraulic circuit	Load sensing, 160 l/min, 350 bar
Boom head flow	75 l/min
Turret rotation motor	Liebherr, high precision
On-board system	12″ MCTS touchscreen, RFID, LMI, LLD
Telematics	MyMagni by Trackunit
Certification	ROPS / FOPS level 2, EN 1459-X, EN 280
Warranty	24 months / 2,000 hours

Enquire about this machine Data sheet (PDF)

Magni RTH 8.39 cab interior with dual joysticks and 12-inch MCTS touchscreen

The cab

Inside the machine

Everything the operator needs, on one screen

A 12-inch MCTS touchscreen carries the Load Moment Indicator, the Live Load Diagram and integrated on-board diagnostics. The RFID system on the boom head recognises which attachment is coupled and loads the matching load chart automatically, so the chart on screen is always the chart in force.

ROPS and level 2 FOPS certification, a premium air-suspension seat, the patented "easy access" entry system, air conditioning and a reversing camera fed into the same display.

Arrange a demonstration

Fixed telescopic handler

Magni TH 4.19 SP

Smart Performance

18.90 mLifting height

4,000 kgCapacity

14.20 mReach

A 74 kW Deutz, four-wheel drive and levelling on both tyres and stabilisers let it reach 18.90 m safely on uneven ground. Built for attachments that do not need boom hydraulics — forks, buckets, hooks and fixed hook arms.

Full specification

Magni data sheet REV10.B EN
Maximum lifting capacity	4,000 kg
Maximum lifting height	18.90 m
Maximum reach	14.20 m
Stabilisers	Pivoting
Engine	Deutz TCD 3.6 L4, 74.4 kW (101.2 hp)
Maximum torque	410 Nm at 1,600 rpm
Transmission	Hydrostatic, 530 bar, 2-speed dropbox
Drive / steering	4WD · 4WS, frontal / concentric / crab
Maximum travel speed	35 km/h
Gradeability, unladen	58 %
Turning radius, end of forks	5,720 mm
Total unladen weight	12,700 kg
Hydraulic circuit	Gear pump, 90 l/min, 280 bar
Certification	ROPS / FOPS level 2, EN 1459-X

Enquire about this machine Data sheet (PDF)

Rotating telescopic handler

Magni RTH 6.31

Compact, multifunctional, 360°

30.80 mLifting height

6,000 kgCapacity

26.90 mReach

Telescopic scissor stabilisers work where space is tight: even partially deployed, the machine gives the best load chart available on each side. Fully extended they open a wide base for full performance through 360°. Twelve published load charts covering forks, winch, hook, jib and platforms.

Full specification

Magni data sheet REV10.B EN
Maximum lifting capacity	6,000 kg
Maximum lifting height	30.80 m
Maximum reach	26.90 m
Rotation	360° continuous
Stabilisers	Telescopic scissor
Engine, Stage IIIA	Volvo TAD 552 VE, 160 kW (218 hp)
Engine, Stage V	Volvo TAD 582 VE, 160 kW (218 hp)
Maximum torque	910 Nm / 925 Nm
Displacement	5.13 l, 4 in line
Transmission	Hydrostatic, 480 bar, 2-speed dropbox
Drive / steering	4WD · 4WS, frontal / concentric / crab
Maximum travel speed	40 km/h
Gradeability, unladen	40 %
Turning radius at forks	6,730 mm
Total unladen weight	22,700 kg
Hydraulic circuit	Load sensing, 160 l/min, 350 bar
Turret rotation motor	Liebherr, high precision
On-board system	12″ MCTS touchscreen, RFID, LMI, LLD
Certification	ROPS / FOPS level 2, EN 1459-X, EN 280
Warranty	24 months / 2,000 hours

Enquire about this machine Data sheet (PDF)

Fixed telescopic handler

Magni TH 4,5.19 P

Levelling on wheels and stabilisers

18.80 mLifting height

4,500 kgCapacity

14.20 mReach

The levelling system lets the operator correct the machine's inclination, so the entire load chart stays available on ground that would otherwise cut lifting performance. Load-sensing hydraulics at 350 bar, RFID attachment recognition and a Load Moment Indicator as standard.

Full specification

Magni data sheet REV10.B EN
Maximum lifting capacity	4,500 kg
Maximum lifting height	18.80 m
Maximum reach	14.20 m
Stabilisers	Pivoting
Engine	Deutz TCD 3.6 L4, 74.4 kW (101.2 hp)
Maximum torque	410 Nm at 1,600 rpm
Transmission	Hydrostatic, 530 bar, 2-speed dropbox
Drive / steering	4WD · 4WS, frontal / concentric / crab
Rear axle	Oscillating and steering, hydraulic lock
Maximum travel speed	35 km/h
Gradeability, unladen	58 %
Turning radius, end of forks	5,720 mm
Total unladen weight	12,700 kg
Hydraulic circuit	Load sensing, 120 l/min, 350 bar
Boom head flow	75 l/min
On-board system	7″ MCTS touchscreen, RFID, LMI, LLD
Certification	ROPS / FOPS level 2, EN 1459-X, EN 280
Warranty	24 months / 2,000 hours

Enquire about this machine Data sheet (PDF)

One machine, three roles

Compatible Attachments

01 · FORKS

A telescopic handler

Fork carriage fitted as standard, for palletised material and general site handling.

02 · WINCH OR HOOK

An off-road crane

Fit the winch or hook and the same machine lifts suspended loads to 39.10 m.

03 · PLATFORM

An aerial platform

Fit the basket and it becomes a MEWP, working to 48.20 m with the over-under platform.

One machine, three roles. The RFID system recognises the attachment, loads the matching chart and configures the load limiter for it — so the fleet argument and the safety argument are the same argument.

After-sales

The machine is the easy part

Supplying the machine is only the beginning. What you cannot order from Germany or Italy is an engineer on your site in Larnaca on a Tuesday afternoon with the right hydraulic part already in the van.

Our engineers were trained by Schwing Stetter and by Magni directly.

AMC engineer servicing machinery on site

On-site servicing at your premises or the job site
Scheduled and preventative maintenance programmes
Mechanical, hydraulic and electrical repair
Technical fault diagnosis and troubleshooting
Mobile service unit for breakdowns
Cyprus-wide coverage
Warranty support on both manufacturer lines

Service & breakdowns

Andros Charalambous+357 99 631 748

Marios MouskouMechanical Engineer+357 96 352 781

Book a service visit Call the service desk

Aradippou

Parts department

A full line, held locally

The spare parts department in Aradippou carries a full line for both manufacturers under a dedicated parts manager. Downtime on a concrete pour is measured in hours, not days, and stock on the island is the only thing that answers it.

Parts enquiry

Warranty

Covered, and supported here

Warranty work is carried out locally by our own engineers. You do not deal with a factory in another country.

Magni telescopic handlers

24 months / 2,000 operating hours

Schwing Stetter machinery

12 months / 1,000 operating hours

Established 1986

Forty years of trust, service and expertise

Success in sales isn't just about closing deals; it's about understanding people, building trust, and creating lasting relationships.
Andros Charalambous, Founder

A.M. Charalambous Ltd was established in 1986. Founded by Andros Charalambous, the business has spent forty years in the Cyprus construction equipment market on a straightforward approach: understand what the customer actually needs, supply machinery that meets it, and build the relationship that makes the second sale easier than the first.

That reputation is why two of the most demanding manufacturers in the sector chose AMC as their exclusive representative on the island — and why the same contractors keep coming back.

Reference projects

Chosen by companies that cannot afford downtime

BBF

Property development

A leading developer of world-class residential and commercial properties in Cyprus.

Recently purchased Magni RTH 6.31 and TH 6.20 for upcoming construction projects.

Athinodorou Group

Ready-mixed concrete · since 1987

An organisation known for its experience in concrete and its quality assurance since 1987, specialising in the design, production and delivery of ready-mixed concrete, plaster and mortar.

Purchased 30 × Stetter AM 10 C truck mixers and 6 × Schwing S 47 SX truck-mounted concrete pumps.

Get in touch

Sales, service and parts

Tell us the machine or the problem. We will come back to you with a person, not a ticket number.

Spare parts & service — Larnaka

E316, Aradippou, Larnaka 7100, Cyprus

+357 99 631 748
andros@amcharalambous.com.cy

Office — Nicosia

John Kennedy 8, Athienitis Building, 1087 Nicosia, Cyprus

Opening hours

Monday – Friday
08:00 – 13:00 · 14:00 – 17:00

Breakdown?

Call the number above or message us on WhatsApp. The mobile service unit covers all of Cyprus.

Construction Equipment.Global Brands.Local Expertise.

Our machines at work

Concrete, from batch to placement

Schwing S 56 SXF

Stetter AM 10 C

Lift, place, rotate

Magni RTH 8.39

Everything the operator needs, on one screen

Magni TH 4.19 SP

Magni RTH 6.31

Magni TH 4,5.19 P

Compatible Attachments

A telescopic handler

An off-road crane

An aerial platform

The machine is the easy part

A full line, held locally

Covered, and supported here

Magni telescopic handlers

Schwing Stetter machinery

Forty years of trust, service and expertise

Chosen by companies that cannot afford downtime

Sales, service and parts

Spare parts & service — Larnaka

Office — Nicosia

Opening hours

Breakdown?

Construction Equipment.
Global Brands.
Local Expertise.